Our modules can be installed with many different presses, such as the Park Tools HHP-1, HHP-2, or HHP-3. The MTS-1 is NOT REQUIRED for bottom bracket installation. THE MTS-1 IS ONLY REQUIRED FOR THE REMOVAL OF MODULES.

• Info
• BB MTS-1 Installation Use Guide
• MTS-1 Removal Use Guide
• MTS-1 Components

• This is a conventional-style removal tool for use with a common hammer. No air hammer required anymore! Click "MTS-1 Removal Use Guide" tab above for details.

  The  Master Tool Set is a stainless steel bike bottom bracket tool that does it all. This bike maintenance kit interfaces with the BBInfinite bottom bracket installation tools included with every module to make installation a snap. It also works to install any press fit bottom bracket or BB30 bearings from any manufacturer as well as all BB90 and BB95 systems. When the day comes when bearing replacement is needed, this bike maintenance kit works as a bearing press tool. If the rare occasion arises where removal of the entire module is needed, you can use a common hammer to drive the module out.

• Some common tools will be needed to facilitate the operation of the press, such as a ratchet with a 7/8" or 22mm socket to drive the press for installation and service procedures, and an hammer for a removal process.
• 304 Stainless Steel construction throughout for long service life and corrosion resistance.
• Compact and light bike maintenance kit.
• ABOUT MASTER TOOL SET RENTAL:
•  Only $30 charged to you after returning the items. You will refunded your $105 deposit at this time. Rental must be returned within 90 days. Some deformation of the Strike Nut from hammer blows is unavoidable during normal use and is NOT considered damage. Cross threading of dies on the shaft IS considered damage and may result in additional charges.

• 99% of the time BBInfinite modules will remain installed and work perfectly for the lifetime of the bike because it is fully serviceable while installed in place. But, if you find yourself in that 1% that needs to remove a module because you've had a frame warranty, you're changing crank systems, you've suffered a Di2 wiring issue, you've sold your bike and are parting it out, and so forth, and you don't want to have to buy our BB removal system, now you don't have to. Simply rent it for just $30 with our bike Bottom Bracket Removal Tool program! 

   

• Technical Specifications

  Weight: 1.5 lbs

  Length: 11 in

  Shaft diameter: 16mmx2.0

  Strike Nut hex drive: 22mm or 7/8"

  Inventory: 1x Strike Nut, 1xTool Shaft, 2x 4030 dies, 2x combination 6805/6806 dies

Find out More